User Manual

Taking a Reading

The handheld Reader should be removed from the Docking Station

using the left hand for ease of locating the Cordella™ Sensor in the

right PA (right side of the chest). It is essential for proper operation of

the Reader to maintain a metal free zone in the area where the

reading will take place and to take each reading in a consistent body

position.

Remove all necklaces, watches and jewelry prior to

beginning the measurement within 3 inches/8 cm of your

prescribed reading location.

Allow the Reader to charge fully before obtaining your first

home reading.

Ensure that you are sitting upright

comfortably and resting for a few minutes

until breathing comfortably. To see the LED

indicator on the Reader, use a mirror or ask a

caregiver to describe it as you take the

reading. The animation walks you through

proper data collection using the Reader.

Briefly:

1. Check to ensure the LED light on the

front of the Docking Station indicates a

battery charge that will allow for the

reading to be completed. The LED on the

Docking Station should be solid white

when the Reader is fully charged and

ready to take a reading.

2. Remove the Reader from the Docking

Station with the left hand to make it

easier to locate the Cordella Sensor in

the right side of the chest. When the

Reader is removed from the Docking

Station it will begin beeping and the light

on the Reader will be solid BLUE.

3. Hold the Reader to the prescribed place

on the chest (that was designated during

training) and listen for a quick series of

beeps which means lock is achieved. The

light on the Reader will blink BLUE in

rapid succession.