Installation Instructions
Table Of Contents
- Table of contents
- Important document information
- Terms and abbreviations
- Registered trademarks
- Product life cycle
- Measuring principle
- Input
- Output
- Electrical connection
- Performance characteristics
- Installation
- Environment
- Process
- Mechanical construction
- Operability
- Certificates and approvals
- CE mark
- RoHS
- EAC conformity
- RCM-Tick marking
- Ex approval
- Explosion-protected smartphones and tablets
- Pressure equipment with allowable pressure ≤ 200 bar (2
- EN 302729-1/2 radio standard
- FCC / Industry Canada
- Japanese Radio Law and Japanese Telecommunications Business Law Compliance
- Other standards and guidelines
- Ordering information
- Accessories
- Supplementary documentation
Micropilot FMR20
22 Endress+Hauser
Installation with mounting bracket, adjustable
A0030606
17 Installation with mounting bracket, adjustable
• Wall or ceiling installation is possible.
• Using the mounting bracket, position the antenna so that it is perpendicular to the product
surface.
NOTICE
There is no conductive connection between the mounting bracket and transmitter housing.
Risk of electrostatic charge.
‣
Integrate the mounting bracket in the local potential equalization system.
The mounting bracket is available as an accessory. → 38
Cantilever installation, with pivot
A
B
C
A0028412
18 Cantilever installation, with pivot
A Installation with cantilever and wall bracket
B Installation with cantilever and mounting frame
C The cantilever can be turned (e.g. in order to position the sensor over the center of the channel, for example)
The cantilever, wall bracket and mounting frame are available as accessories. → 38