Installation Instructions
Table Of Contents
- Table of contents
- Important document information
- Terms and abbreviations
- Registered trademarks
- Product life cycle
- Measuring principle
- Input
- Output
- Electrical connection
- Performance characteristics
- Installation
- Environment
- Process
- Mechanical construction
- Operability
- Certificates and approvals
- CE mark
- RoHS
- EAC conformity
- RCM-Tick marking
- Ex approval
- Explosion-protected smartphones and tablets
- Pressure equipment with allowable pressure ≤ 200 bar (2
- EN 302729-1/2 radio standard
- FCC / Industry Canada
- Japanese Radio Law and Japanese Telecommunications Business Law Compliance
- Other standards and guidelines
- Ordering information
- Accessories
- Supplementary documentation
Micropilot FMR20
30 Endress+Hauser
80 mm (3 in) antenna with UNI slip-on flange 3"/DN80
ø75 (2.95)
8 x
ø21 (0.83)
ø115.6 (4.55)
ø156.2 (6.15)
ø200 (7.87)
178 (7)
18.5 (0.73)
9 (0.36)
A0028813
25 Dimensions 80 mm (3 in) antenna with slip-on flange 3"/DN80, engineering unit: mm (in)
Applies to the following device versions
• Feature 095 "Process connection rear side"
– VCE: Thread ASME MNPT1; PVDF; FNPT 1/2" conduit connection
– WDE: Thread G1 ISO228; PVDF; cable gland
• Feature 100 "Process connection front side"
RPF: UNI slip-on flange 3"/DN80/80; PP, suitable for 3" 150 lbs/DN80 PN16/10K 80
80 mm (3 in) antenna with slip-on flange 4"/DN100
ø175 (6.89)
ø 98 (3.86)
ø190.5 (5.7)
ø228.6 (9)
188 (7.4)
20 (0.79)
30.5 (1.2)
ø143 (5.63)
8 x
19 (0.75)
A0028816
26 Dimensions 80 mm (3 in) antenna with slip-on flange 4"/DN100, engineering unit: mm (in)
Applies to the following device versions
• Feature 095 "Process connection rear side"
– VCE: Thread ASME MNPT1; PVDF; FNPT 1/2" conduit connection
– WDE: Thread G1 ISO228; PVDF; cable gland
• Feature 100 "Process connection front side"
RRF: UNI slip-on flange 4"/DN100/100; PP, suitable for 4" 150 lbs/DN100 PN16/10K 100