Installation Instructions
Table Of Contents
- Table of contents
- Important document information
- Terms and abbreviations
- Registered trademarks
- Product life cycle
- Measuring principle
- Input
- Output
- Protocol-specific data, Modbus
- Electrical connection
- Performance characteristics
- Installation
- Environment
- Process
- Mechanical construction
- Operability
- Certificates and approvals
- Ordering information
- Accessories
- Documentation
Micropilot FMR20 Modbus RS485
Endress+Hauser 19
Installation with mounting bracket, adjustable
The mounting bracket can be ordered as an accessory or together with the device via the product
structure "Accessory enclosed".
A0030606
18 Installation with mounting bracket, adjustable
• Wall or ceiling installation is possible.
• Using the mounting bracket, position the antenna so that it is perpendicular to the product
surface.
NOTICE
There is no conductive connection between the mounting bracket and transmitter housing.
Electrostatic charging possible.
‣
Integrate the mounting bracket in the local potential equalization system.
Cantilever installation, with pivot
The cantilever, wall bracket and mounting frame are available as accessories.
A
B
C
A0028412
19 Cantilever installation, with pivot
A Cantilever with wall bracket
B Cantilever with mounting frame
C Cantilever can be turned (e.g., in order to position the device over the center of the flume)
Horizontal installation with reflector plate
The reflector plate is available as an accessory.