Installation Instructions
Table Of Contents
- Table of contents
- Important document information
- Terms and abbreviations
- Registered trademarks
- Product life cycle
- Measuring principle
- Input
- Output
- Protocol-specific data, Modbus
- Electrical connection
- Performance characteristics
- Installation
- Environment
- Process
- Mechanical construction
- Operability
- Certificates and approvals
- Ordering information
- Accessories
- Documentation
Micropilot FMR20 Modbus RS485
42 Endress+Hauser
Cantilever with pivot
Installation type sensor process connection rear side
3
1
2
A B
1
A0028885
45 Installation type sensor process connection rear side
A Installation with cantilever and wall bracket
B Installation with cantilever and mounting frame
1 Cantilever
2 Wall bracket
3 Mounting frame
Cantilever (short) with pivot, sensor process connection on rear
585 (23)
200 (7.87)
M8
35 (1.4)
50
(2.0)
20 (0.8)
105 (4.1)
35
(1.4)
22
(0.9)
6.5
(0.3)
15
(0.6)
100 (3.9)
25
(1.0)
35 (1.4)
100 (3.9)75 (2.9)
250 (9.84)
20 (0.8)
75 (2.9)
2
(0.08)
2 (0.08)
A0037806
46 Dimensions of cantilever (short) with pivot for sensor process connection on rear, engineering unit: mm
(in)
Weight:
2.1 kg (4.63 lb)
Material: Steel, hot-dip galvanized
Order number: 919790-0000
Material: Steel, 316Ti (1.4571)
Order number: 919790-0001
• 35 mm (1.38 in) openings for all G 1" or MNPT 1" connections on rear
• 22 mm (0.87 in) opening can be used for an additional sensor
• Retaining screws are included in delivery