Installation Instructions

Micropilot FMR20 Modbus RS485
44 Endress+Hauser
Cantilever (short) with pivot, G 1-½" sensor process connection on front
585 (23)
200 (7.87)
M8
35 (1.4)
50 (2.0)
20 (0.8)
105 (4.1)
50 (2.0)
22 (0.9)
2 (0.08)
6.5 (0.3)
15 (0.6)
100 (3.9)
25 (1.0)
35 (1.4)
100 (3.9)75 (2.9)
250 (9.84)
20 (0.8)
75 (2.9)
2 (0.08)
A0037802
 49 Dimensions of cantilever (short) with pivot for G 1-½" sensor process connection on front, engineering
unit: mm (in)
Weight:
1.9 kg (4.19 lb)
Material: Steel, hot-dip galvanized
Order number: 52014131
Material: Steel, 316Ti (1.4571)
Order number: 52014132
• 50 mm (2.17 in) openings for all G 1-½" (MNPT 1-½") connections on front
• 22 mm (0.87 in) opening can be used for an additional sensor
• Retaining screws are included in delivery
Cantilever (long) with pivot, G 1-½ sensor process connection on front
1085 (42.7)
300 (11.8)
M8
35 (1.4)
50 (2.0)
20 (0.8)
105 (4.1)
50 (2.0)
22 (0.9)
3 (0.12)
6.5 (0.3)
15 (0.6)
100 (3.9)
25 (1.0)
35 (1.4)
100 (3.9)75 (2.9)
750 (29.5)
20 (0.8)
75 (2.9)
3 (0.12)
A0037803
 50 Dimensions of cantilever (long) with pivot for G 1-½" sensor process connection on front, engineering
unit: mm (in)