Installation Instructions
Table Of Contents
- Table of contents
- Important document information
- Terms and abbreviations
- Registered trademarks
- Product life cycle
- Measuring principle
- Input
- Output
- Protocol-specific data, Modbus
- Electrical connection
- Performance characteristics
- Installation
- Environment
- Process
- Mechanical construction
- Operability
- Certificates and approvals
- Ordering information
- Accessories
- Documentation
Micropilot FMR20 Modbus RS485
Endress+Hauser 45
Weight:
4.4 kg (9.7 lb)
Material: Steel, hot-dip galvanized
Order number: 52014133
Material: Steel, 316Ti (1.4571)
Order number: 52014134
• 50 mm (2.17 in) openings for all G 1-½" (MNPT 1-½") connections on front
• 22 mm (0.87 in) opening can be used for an additional sensor
• Retaining screws are included in delivery
Cantilever (short) with pivot, G 2" sensor process connection on front
585 (23)
200 (7.87)
M8
35 (1.4)
50 (2.0)
20 (0.8)
105 (4.1)
62 (2.4)
22 (0.9)
2 (0.08)
6.5 (0.3)
15 (0.6)
100 (3.9)
25 (1.0)
35 (1.4)
100 (3.9)75 (2.9)
250 (9.84)
20 (0.8)
75 (2.9)
2 (0.08)
A0037804
51 Dimensions of cantilever (short) with pivot for G 2" sensor process connection on front, engineering unit:
mm (in)
Weight:
1.9 kg (4.19 lb)
Material: Steel, hot-dip galvanized
Order number: 52014135
Material: Steel, 316Ti (1.4571)
Order number: 52014136
• 62 mm (2.44 in) openings for all G 2" (MNPT 2") connections on front
• 22 mm (0.87 in) opening can be used for an additional sensor
• Retaining screws are included in delivery