Installation Instructions
Table Of Contents
- Table of contents
- Important document information
- Terms and abbreviations
- Registered trademarks
- Product life cycle
- Measuring principle
- Input
- Output
- Protocol-specific data, Modbus
- Electrical connection
- Performance characteristics
- Installation
- Environment
- Process
- Mechanical construction
- Operability
- Certificates and approvals
- Ordering information
- Accessories
- Documentation
Micropilot FMR20 Modbus RS485
46 Endress+Hauser
Cantilever (long) with pivot, G 2" sensor process connection on front
1085 (42.7)
300 (11.8)
M8
35 (1.4)
50 (2.0)
20 (0.8)
105 (4.1)
62 (2.4)
22 (0.9)
3 (0.12)
6.5 (0.3)
15 (0.6)
100 (3.9)
25 (1.0)
35 (1.4)
100 (3.9)75 (2.9)
750 (29.5)
20 (0.8)
75 (2.9)
3 (0.12)
A0037805
52 Dimensions of cantilever (long) with pivot for G 1-½" sensor process connection on front, engineering
unit: mm (in)
Weight:
4.4 kg (9.7 lb)
Material: Steel, hot-dip galvanized
Order number: 52014137
Material: Steel, 316Ti (1.4571)
Order number: 52014138
• 62 mm (2.44 in) openings for all G 2" (MNPT 2") connections on front
• 22 mm (0.87 in) opening can be used for an additional sensor
• Retaining screws are included in delivery
Mounting frame (short) for cantilever with pivot
3.2 (0.13)
20 (0.8)
55 (2.17)
100 (3.94)
25 (0.98)
700 (27.6)
45 (1.77)
76
(2.99)
100
(3.94)
200 (7.87)
13 (0.5)
ø33.7 (1.3)
130 (5.12)
150 (5.91)
100
(3.94)
60 (2.36)
4 (0.16)
6.5 (0.3)
109 (4.29)
75 (2.95)
A0037799
53 Dimensions of mounting frame (short), engineering unit: mm (in)