Installation Instructions

Micropilot FMR20 Modbus RS485
Endress+Hauser 51
Reflector plate for horizontal mounting
The reflector plate is used for installation in confined spaces (sewer shafts).
The reflector plate can be ordered together with the device via the "Enclosed accessories" section of
the product order structure.
100
(3.94)
100
(3.94)
280 (11)
144 (5.67)
!9 (0.35)
A0038142
 58 Dimensions of reflector plate, engineering unit: mm (in)
Material
316L (1.4404)
Order number
t.b.d.
Documentation
The following documentation types are available in the Downloads of the Endress+Hauser website
(www.endress.com/downloads):
For an overview of the scope of the associated Technical Documentation, refer to the following:
• W@M Device Viewer (www.endress.com/deviceviewer): Enter the serial number from
nameplate
• Endress+Hauser Operations App: Enter the serial number from the nameplate or scan the 2D
matrix code (QR code) on the nameplate
Brief Operating Instructions
(KA)
Guide that takes you quickly to the 1st measured value
The Brief Operating Instructions contain all the essential information from incoming acceptance to
initial commissioning.
Operating Instructions (BA)
Your reference guide
These Operating Instructions contain all the information that is required in various phases of the life
cycle of the device: from product identification, incoming acceptance and storage, to mounting,
connection, operation and commissioning through to troubleshooting, maintenance and disposal.
Safety Instructions (XA)
Depending on the approval, the following Safety Instructions (XA) are supplied with the device. They
are an integral part of the Operating Instructions.
The nameplate indicates the Safety Instructions (XA) that are relevant to the device.