Product Info

DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFTDRAFT DRAFT DRAFT
Micropilot FMR50
18 V. 10, Rev. 2, 1-10-2019 Endress+Hauser
Min. inter PDU delay 8
Max. response delay 20
Transducer Blocks
Block Content Output values
Setup Transducer Block Contains all parameters for a standard commissioning
procedure
• Level or volume
1)
(Channel 1)
• Distance (Channel 2)
Advanced Setup
Transducer Block
Contains all parameters for a more detailed
configuration of the device
no output values
Display Transducer Block Contains all parameters for the configuration of the
display module
no output values
Diagnostic Transducer
Block
Contains diagnostic information no output values
Advanced Diagnostic
Transducer Block
Contains parameters for the Advanced Diagnostic no output values
Expert Configuration
Transducer Block
Contains parameters which require detailed knowledge
of the functionalities of the device
no output values
Expert Information
Transducer Block
Contains information about the state of the device no output values
Service Sensor Transducer
Block
Contains parameters which can only be operated by
Endress+Hauser service personnel
no output values
Service Information
Transducer Block
Contains information on the state of device which is
relevant for service operations
no output values
Data Transfer Transducer
Block
Contains parameters which allow to backup the device
configuration in the display module and to restore it
into the device. Access to these parameters is restricted
to the Endress+Hauser service.
no output values
1) depending on the configuration of the block
Function Blocks
Block Content Number of
permanent
blocks
Number of
instantiable
blocks
Execution
time
Functionality
Resource Block The Resource Block contains all the
data that uniquely identifies the
field device. It is an electronic
version of a nameplate of the
device.
1 0 - enhanced
Analog Input
Block
The AI block takes the
manufacturer's input data, selected
by channel number, and makes it
available to other function blocks at
its output.
2 3 25 ms enhanced
Discrete Input
Block
The DI block takes a discrete input
value (e.g. indication of an level
limit), and makes it available to
other function blocks at its output.
1 2 20 ms standard
Mutiple
Analog Output
Block
This block is used to transfer analog
data from the bus into the device
1 0 20 ms standard
Mutiple
Discrete
Output Block
This block is used to transfer
discrete data from the bus to the
device.
1 0 20 ms standard