Product Info

Table Of Contents
DRAFT DRAFT DRAFT DRAFT DRAFT DRAFT DRAFTDRAFT DRAFT DRAFT
Micropilot FMR50
76 V. 10, Rev. 2, 1-10-2019 Endress+Hauser
Feature 100 of the product structure Process connection
XWG UNI slip on flange 3"/DN80/80, PP
XZG UNI slip on flange 4"/DN100/100, PP
X0G UNI slip on flange 6"/DN150/150, PP
Process connections without CRN approval are not included in this table.
Refer to the product structure to see which process connections are available for a specific
device type.
For some process connections not listed in the product structure a CRN approval is available
on request.
CRN approved devices are marked with the registration number OF15872.5C on the
nameplate.
For device versions listed in the table below, the maximum allowed pressure is reduced if they
have a CRN approval. For device versions not listed in the table below the pressure range as
indicated in the "Process" chapter →  52 is not affected by the CRN approval.
Product Antenna
1)
Process connection
2)
Seal
3)
max. pressure
FMR50/FMR56 BN: Horn 80mm/3" XWG: UNI slip-on flange 3" 1.6 bar (23.2 psi)
XZG: UNI slip-on flange 4" 1.5 bar (21.75 psi)
X0G: UNI slip-on flange 6" 1.5 bar (21.75 psi)
BR: Horn 100mm/4" XZG: UNI slip-on flange 4" 12 bar (17.4 psi)
X0G: UNI slip-on flange 6" 1.8 bar (26.1 psi)
1) Feature 070 of the product structure
2) Feature 100 of the product structure
3) Feature 090 of the product structure
Track record
FMR5x is the upgrade model of the corresponding FMR2xx series.