Product Info
Table Of Contents
- Table of contents
- Important document information
- Function and system design
- Input
- Output
- Power supply
- Performance characteristics
- Mounting
- Environment
- Process
- Mechanical construction
- Operability
- Certificates and approvals
- Ordering information
- Application packages
- Accessories
- Weather protection cover 316L
- Plastic weather protection cover
- Mounting bracket, adjustable
- M12 socket
- Remote display FHX50B
- Gas-tight feedthrough
- Commubox FXA195 HART
- HART Loop Converter HMX50
- FieldPort SWA50
- Wireless HART adapter SWA70
- Fieldgate FXA42
- Field Xpert SMT70
- DeviceCare SFE100
- FieldCare SFE500
- Memograph M
- RN42
- Documentation
- Registered trademarks
Micropilot FMR60B HART
52 V. 1, Rev. 2, 26-07-2022 Endress+Hauser
Remote operation Via HART protocol
Via service interface (CDI)
Operation via Bluetooth® wireless technology (optional)
Prerequisite
• Measuring device with display including Bluetooth
• Smartphone or tablet with Endress+Hauser SmartBlue app or PC with DeviceCare from version
1.07.05 or FieldXpert SMT70
The connection has a range of up to 25 m (82 ft). The range can vary depending on environmental
conditions such as attachments, walls or ceilings.
The operating keys on the display are locked as soon as the device is connected via Bluetooth.
System integration HART
Version 7
Supported operating tools
Smartphone or tablet with Endress+Hauser SmartBlue app, DeviceCare from version 1.07.05,
FieldCare, DTM, AMS and PDM
HistoROM data management
When replacing the electronic insert, the stored data is transferred by reconnecting the HistoROM.
The device serial number is saved in the HistoROM. The electronics serial number is saved in the
electronics.
Certificates and approvals
Current certificates and approvals that are available for the product can be selected via the Product
Configurator at www.endress.com:
1. Select the product using the filters and search field.
2. Open the product page.
3. Select Configuration.
CE mark
The measuring system meets the legal requirements of the applicable EU directives. These are listed
in the corresponding EU Declaration of Conformity together with the standards applied.
The manufacturer confirms successful testing of the device by affixing to it the CE mark.
RoHS
The measuring system meets the substance restrictions of the Directive on the Restriction of the Use
of Certain Hazardous Substances 2011/65/EU (RoHS 2) and the Delegated Directive (EU) 2015/863
(RoHS 3).
RCM marking
The supplied product or measuring system meets the ACMA (Australian Communications and Media
Authority) requirements for network integrity, interoperability, performance characteristics as well
as health and safety regulations. Here, especially the regulatory arrangements for electromagnetic
compatibility are met. The products bear the RCM marking on the nameplate.
A0029561
Ex approvals
Additional safety instructions must be followed for use in hazardous areas. Please refer to the
separate "Safety Instructions" (XA) document included in the delivery. Reference to the applicable XA
can be found on the nameplate.