Installation Instructions
Table Of Contents
- Table of contents
- About this document
- Function and system design
- Input (wired interface)
- Output (wireless interface)
- Power supply
- Installation
- Environment
- Mechanical construction
- Human interface
- Certificates and approvals
- Ordering information
- Accessories
- Supplementary documentation
- Registered trademarks
- Radio approvals
FieldPort SWA50
Endress+Hauser 15
Ordering information
Detailed information on the product structure are available as follows:
• On the Endress+Hauser website: www.endress.com → Enter "SWA50" in the search field → Click
the icon to the right → Product Configurator opens → Configure product
• From your Endress+Hauser Sales Center: www.addresses.endress.com
Scope of delivery
• FieldPort SWA50
• Optional accessory: mounting bracket
Accessories
Various accessories are available for the device, and can be ordered with the device or at a later stage
from Endress+Hauser. Detailed information on the order code in question is available from your local
Endress+Hauser Sales Center or on the product page of the Endress+Hauser website:
www.endress.com.
Device-specific accessories Mounting bracket
Order number
71487573
Material
Stainless steel 1.4404 (316L)
2
1
3 4
A0043312
15 FieldPort SWA50 mounted via optional mounting bracket
1 Hexagonal-headed bolt for grounding
2 Support bracket
3 Mounting bracket
4 Round bracket
Mounting and alignment options
The mounting bracket can be mounted as follows:
• On pipes with a maximum diameter of 65 mm
• On walls
The FieldPort can be aligned as follows using the support bracket:
• Via the various mounting positions on the mounting bracket
• By rotating the support bracket