Installation Instructions

FieldPort SWA50
Endress+Hauser 3
About this document
Symbols Safety symbols
DANGER
This symbol alerts you to a dangerous situation. Failure to avoid this situation will result in serious or
fatal injury.
WARNING
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in serious or
fatal injury.
CAUTION
This symbol alerts you to a dangerous situation. Failure to avoid this situation can result in minor or
medium injury.
NOTICE
This symbol contains information on procedures and other facts which do not result in personal
injury.
Symbols for certain types of information
Symbol Meaning
Permitted
Procedures, processes or actions that are permitted.
Preferred
Procedures, processes or actions that are preferred.
Forbidden
Procedures, processes or actions that are forbidden.
Tip
Indicates additional information.
Reference to documentation.
A
Reference to page.
Reference to graphic.
Visual inspection.
Function and system design
Function
The FieldPort SWA50 converts the HART signal of the connected HART field device to a reliable and
encrypted Bluetooth® or WirelessHART signal. The FieldPort SWA50 can be retrofitted to all 2-wire
or 4-wire HART field devices.
The Endress+Hauser SmartBlue app or the Endress+Hauser Field Xpert is used to configure the
FieldPort SWA50 and to visualize the measured values and status of the connected HART field
device.
HART field devices can be connected to the Netilion Cloud via the FieldPort SWA50 and a FieldEdge
device.
For detailed information on the Netilion Cloud, see https://netilion.endress.com
The WirelessHART version of the SWA50 can be integrated into any WirelessHART network via a
WirelessHART-Fieldgate, such as SWG70.
In addition, the WirelessHART version can be operated as follows:
• Local configuration with FieldCare SFE500 or DeviceCare via DTM for SWA50
• Remote configuration with FieldCare SFE500 via WirelessHART Fieldgate SWG70 and DTM for
SWA50 and SWG70