User's Manual
Table Of Contents
- Application
- Your benefits
- Table of contents
- Applications
- Communication interface
- Function and system design
- Measuring system
- Configuration with analogue input 4...20 mA (FXA320 only)
- Configuration with binary input (FXA320 only)
- HART - Point-to-Point configuration (FXA520 only)
- Configuration with analogue input 4...20 mA (FXA520 only)
- HART Multiplexer configuration (FXA520 only)
- HART - Multidrop configuration (FXA520 only)
- All E+H measuring devices with the HART protocol can, therefore, be used to the full extent with ...
- Measuring system
- Input
- Output
- Power supply
- Operating conditions: Installation
- Installation instructions
- Operating conditions: Environment
- Mechanical construction
- Human interface
- Certificates and approvals
- Telecommunications Regulatory Compliance
- Ordering information
- Accessories
- Documentation
Fieldgate FXA320, FXA520
24 Endress + Hauser
Accessories
Note!
The following table gives an overview of possible application for the individual accessory parts with the
Fieldgate FXA320 or FXA520.
Protective housing The protective housing in protection class IP 66 is equipped with an integrated top-hat rail and is closed with
a transparent cover that can also be lead sealed.
Dimensions:
W 180 / H 182 / D 165
Colour:
Light grey RAL 7035.
Order number: 52010132.
DAT module An external EEPROM, in which the configuration data is saved identically to the internal EEPROM, can be
attached optionally via plug. For example, this allows for the FXA320/520 to be changed in the event of a
defect, without losing the customer-specific configuration data.
Order number: 52013311.
PC cable A PC can be connected to the FXA320/520 for configuration purposes via a serial RS 232 connection. Order
number: 52013984.
Telephone cable RJ11 (analogue plug, double-sided, length: 5 m). Order number: 52014031.
Fieldgate data access Fieldgate Data Access software assists with the collection of data from different Fieldgates. The fetching of data
is controlled via entries in the Scheduler. Time control can be via periodic intervals or at user-defined times.
Under Windows NT4 / 2000 / XP, collection of the data can accomplished via a "system service", which runs
in the background. The data are saved in CSV format. Further processing of the data can be carried out with,
e.g. Excel.
Fieldgate OPC server The Fieldgate OPC server provides an interface between one or more Endress+Hauser Fieldgate devices and
all possible OPC Data Access 2.0 compatible Clients. The Fieldgate can be connected via a dial-up modem or
through a TCP/IP network.
Java applets Java applets for a customised view of the screen.
Accessory Fieldgate FXA320 Fieldgate FXA520
Protective housing X X
DAT module X X
PC cable X X
Telephone cable (analogue version only) is required is required
Fieldgate data access X X
Fieldgate OPC server X X
Java applets X X
Antenna (GSM version only) is required is required
HART Client (FXA 520 only) — X
Multiplexer (FXA 520 only) — X
E+H power supply units (FXA 520 only) — X