User's Manual
Table Of Contents
- Table of contents
- Important document information
- Terms and abbreviations
- Registered trademarks
- Function and system design
- Input
- Output
- Power supply
- Performance characteristics
- Installation
- Environment
- Process
- Mechanical construction
- Operability
- Certificates and approvals
- CE mark
- RoHS
- RCM-Tick marking
- Ex approval
- Dual seal according to ANSI/ISA 12.27.01
- Functional safety
- WHG
- Pressure equipment with allowable pressure ≤ 200 bar (2
- Marine approval
- Radio standard EN 302729-1/2
- Radio standard EN 302372-1/2
- FCC
- Industry Canada
- CRN approval
- Test, certificate
- Hard-copy product documentation
- Other standards and guidelines
- Ordering information
- Application Packages
- Accessories
- Supplementary documentation
Micropilot FMR67
Endress+Hauser V. 1, Rev. 3, 11-04-2017 29
FMR67
A0032083
A0032084
Antenna
1)
Drip-off, PTFE 50 mm / 2" PTFE flush mount 80 mm / 3"
Beam angle α 6 ° 4 °
Distance (D) Beamwidth diameter W
5 m (16 ft) 0.52 m (1.70 ft) 0.35 m (1.15 ft)
10 m (33 ft) 1.05 m (3.44 ft) 0.70 m (2.30 ft)
15 m (49 ft) 1.57 m (5.15 ft) 1.05 m (3.44 ft)
20 m (66 ft) 2.10 m (6.89 ft) 1.40 m (4.59 ft)
25 m (82 ft) 2.62 m (8.60 ft) 1.75 m (5.74 ft)
30 m (98 ft) 3.14 m (10.30 ft) 2.10 m (6.89 ft)
35 m (115 ft) 3.67 m (12.04 ft) 2.44 m (8.00 ft)
40 m (131 ft) 4.19 m (13.75 ft) 2.79 m (9.15 ft)
45 m (148 ft) 4.72 m (15.49 ft) 3.14 m (10.30 ft)
50 m (164 ft) 5.24 m (17.19 ft) 3.49 m (11.45 ft)
60 m (197 ft) - 4.19 m (13.75 ft)
70 m (230 ft) - 4.89 m (16.04 ft)
80 m (262 ft) - 5.59 m (18.34 ft)
90 m (295 ft) - 6.29 m (20.64 ft)
100 m (328 ft) - 6.98 m (22.90 ft)
110 m (361 ft) - 7.68 m (25.20 ft)
120 m (394 ft) - 8.38 m (27.49 ft)
125 m (410 ft) - 8.73 m (25.64 ft)
1) Feature 070 in the product structure
Installation: Drip-off
antenna PTFE 50 mm / 2"
Aligning the antenna axis
Align the antenna vertically to the product surface.
Optionally, a variable flange seal (available as an accessory) can be used for alignment
Attention:
The maximum reach of the antenna can be reduced if it is not installed perpendicular to the
product.
Radial alignment of the antenna
Radial alignment of the antenna is not necessary because the effect of polarization is negligible due
to the narrow beam angle.
Information concerning nozzles
The maximum nozzle length H
max
depends on the nozzle diameter D: