User's Manual

Micropilot FMR67
46 V. 1, Rev. 3, 11-04-2017 Endress+Hauser
A-A
10 (0.39)
ø175 (6.89)
ø225 (8.86)
A A
ø185.5 (7.3)
1
ø405 (15.9)
ø358 (14.1)
4
ø26 (1.02)
A
A
2
ø12 (0.47)
ø26 (1.02)
ø280 (11.02)
ø240 (9.45)
ø340 (13.4)
ø294.5 (11.6)
A A
3
ø26 (1.02)
ø26 (1.02)
A
A
ø23 (0.91)
1
2
×
3
0
°
6
×
6
0
°
4
×
9
0
°
6
×
6
0
°
4
×
9
0
°
4
×
9
0
°
4
×
9
0
°
4
×
9
0
°
ø19 (0.75)
A0032136
Item Feature 100: process connection Suitable for Material
1:
XCA:
alignment device, UNI 4"/DN100/100A, max 14.5lbs/PN1/1K
• 4" 150lbs
•
DN100 PN16
• 10K 100A
Aluminum
2:
XDA:
alignment device, UNI 6"/DN150/150A, max 14.5lbs/PN1/1K
• 6" 150lbs
• DN150 PN16
• 10K 150A
Aluminum
3:
XEA:
alignment device, UNI 8"/DN200/200A, max 14.5lbs/PN1/1K
• 8" 150lbs
• DN200 PN16
• 10K 200A
Aluminum
4:
XFA:
alignment device, UNI 10"/DN250/250A, max 14.5lbs/PN1/1K
• 10" 150lbs
• DN250 PN16
• 10K 250A
Aluminum
The number of bolts is reduced in some cases. To match different standards the bores are
enlarged. Therefore the bolts should be aligned centrally to the counter flange before
tightening.