User's Manual
Table Of Contents
- Table of contents
- Important document information
- Terms and abbreviations
- Registered trademarks
- Function and system design
- Input
- Output
- Power supply
- Performance characteristics
- Installation
- Environment
- Process
- Mechanical construction
- Operability
- Certificates and approvals
- CE mark
- RoHS
- RCM-Tick marking
- Ex approval
- Dual seal according to ANSI/ISA 12.27.01
- Functional safety
- WHG
- Pressure equipment with allowable pressure ≤ 200 bar (2
- Marine approval
- Radio standard EN 302729-1/2
- Radio standard EN 302372-1/2
- FCC
- Industry Canada
- CRN approval
- Test, certificate
- Hard-copy product documentation
- Other standards and guidelines
- Ordering information
- Application Packages
- Accessories
- Supplementary documentation
Micropilot FMR67
Endress+Hauser V. 1, Rev. 3, 11-04-2017 47
Weight
Housing
Part Weight
GT18 housing - stainless steel Approx. 4.5 kg (9.9 lb)
GT19 housing - plastic Approx. 1.2 kg (2.7 lb)
GT20 housing - aluminum Approx. 1.9 kg (4.2 lb)
Antenna and process connection
Device Antenna
1)
Weight of antenna /
process connection
FMR67
GA:
Drip-off, PTFE DN50
Max. 2 kg (4.4 lb) + flange weight
2)
GP:
PTFE flush mount DN80
Max. 3.5 kg (7.72 lb) + flange weight
2)
Flange weight for process connection with alignment unit, see the
following table
→ 47
1) Order code 070
2)
For flange weights (316/316L) see Technical Information TI00426F.
Process connection alignment unit
Antenna
1)
Process connection
2)
Flange weight
incl. clamping ring
GP:
PTFE flush mount DN80
XCA:
Alignment unit, UNI 4"/DN100/100, aluminum
1.65 kg (3.64 lb)
XDA:
Alignment unit, UNI 6"/DN150/150, aluminum
2.45 kg (5.40 lb)
XEA:
Alignment unit, UNI 8"/DN200/200, aluminum
3.45 kg (7.61 lb)
XFA:
Alignment unit, UNI 10"/DN250/250, aluminum
4.95 kg (10.91 lb)
1) Order code 070
2)
Order code 100