Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Product description
- 4 Incoming acceptance and product identification
- 5 Installation
- 6 Electrical connection
- 7 Operation options
- 8 Commissioning
- 9 Operation
- 10 Diagnostics and troubleshooting
- 11 Maintenance
- 12 Repair
- 13 Accessories
- 14 Technical data
- Index
Commissioning Liquiline Mobile CML18
24 Endress+Hauser
8 Commissioning
8.1 Preparatory steps
Charge the device.→ 14
Connect the sensor.→ 14
8.2 Function check
L
WARNING
Connection errors
The safety of people and of the measuring point is at risk!
‣
Put the device into operation only if you can answer yes to all the following questions.
Device condition and specifications
‣
Are the device and all the cables free from damage on the outside?
‣
Are the mounted cables strain relieved?
‣
Are the cables routed without loops and cross-overs?
8.3 Switching on the device
A0040976
13 Switching on the device
‣
Press or .
The device starts up.
A connected sensor is recognized automatically.
The time required before a measured value is displayed depends on the sensor type and
measuring principle and can vary.