Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Product description
- 4 Incoming acceptance and product identification
- 5 Installation
- 6 Electrical connection
- 7 Operation options
- 8 Commissioning
- 9 Operation
- 10 Diagnostics and troubleshooting
- 11 Maintenance
- 12 Repair
- 13 Accessories
- 14 Technical data
- Index
Liquiline Mobile CML18 Commissioning
Endress+Hauser 27
Power-off w/o charger (power off without charger)
Function description Configuration options
Set the time until the device switches off automatically if it is running on the
battery.
• 1 min
• 5 min
• 15 min
• 30 min
• 1 h
• 2 h
• Never
8.6.3 Signal sounds
1. Navigate to: Signal sounds
Main menu >> System >> Signal sounds
2. Press to scroll through the predefined values.
Description of setting Configuration options
Switch signal sounds on/off • Enabled
• Disabled
8.6.4 Adjusting the display brightness
1. Navigate to: Display brightness
Main menu >> System >> Display brightness
2. Press to adjust the display brightness.
Description of setting Configuration options
Set the display brightness • Low
• Medium
• High
• Maximum
8.6.5 Reboot
‣
Press and hold
and simultaneously for at least 7 seconds.
The device restarts.
8.6.6 Displaying regulatory information and approvals
1. Navigate to: Regulatory information
Main menu >> System >> Regulatory information
2. Press to display regulatory information and approvals.