Operating Instructions

Liquiline Mobile CML18 Operation
Endress+Hauser 29
9 Operation
9.1 Reading measured values
Measuring screens are shown on the display when a sensor is connected.
For each sensor, there are 3 measuring screens with different measured variables→  20.
To scroll through the measuring screens:
‣
Press .
After the last measuring screen, the display returns to the first measuring screen.
9.1.1 Saving the individual measured value (Grab Sample)
‣
In the measurement window, press
.
 The current measured values are saved in the internal memory.
Successful saving of the measured values is acknowledged with the message *Data
record saved* on the display.
9.1.2 Saving measured values automatically (Data logger)
Configure the data logger →  28.
9.1.3 Displaying saved measured values
‣
Navigate to: Log entries
 Main menu >> Diagnostics >> Log entries
The saved log entries are organized according to the logging process.
9.1.4 Exporting saved measured values
Saved data can be transmitted from the internal device memory to mobile end devices.
Preparatory steps
1. Enable Bluetooth. →  25
2. Link the device to a mobile end device via the SmartBlue App. →  20
Transferring the data
1. Select the device in the SmartBlue App.
2. Select in the SmartBlue App.