Operating Instructions
Table Of Contents
- Table of contents
- 1 About this document
- 2 Basic safety instructions
- 3 Product description
- 4 Incoming acceptance and product identification
- 5 Installation
- 6 Electrical connection
- 7 Operation options
- 8 Commissioning
- 9 Operation
- 10 Diagnostics and troubleshooting
- 11 Maintenance
- 12 Repair
- 13 Accessories
- 14 Technical data
- Index
Liquiline Mobile CML18 Repair
Endress+Hauser 37
12 Repair
12.1 Return
The product must be returned if repairs or a factory calibration are required, or if the wrong
product was ordered or delivered. As an ISO-certified company and also due to legal
regulations, Endress+Hauser is obliged to follow certain procedures when handling any
returned products that have been in contact with medium.
To ensure the swift, safe and professional return of the device:
‣
Refer to the website www.endress.com/support/return-material for information on the
procedure and conditions for returning devices.
12.2 Disposal
The device contains electronic components. The product must be disposed of as electronic
waste.
‣
Observe the local regulations.
The battery cannot be removed or replaced by the end customer!
The battery may only be disposed of by properly trained staff. For this, the 4 screws on
the top of the device must be untightened in order to remove the device interior, along
with the accumulator battery, from the housing.
13 Accessories
The latest list of all the compatible Memosens sensors is provided on the product page:
www.endress.com/CML18