Product Manual

ManualsBrandsEndurance Marine Manuals000 Lbs. + AboveIndustrial Worm Gear Hand Winch — No Cable, 2000-Lb. Capacity

INSTALLATION AND OPERATION

MANUAL

WORM GEAR HAND WINCH

TO PREVENT SERIOUS INJURY,

READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE.

Due to continuing improvements,actual product may differ slightly from the product described herein.

210- 13198 26th Ave, Surrey British Columbia V3S3V7

info@endurance-marine.com www.shop-endurance-marine.com Toll Free: 1-877-535-0669

Summary of content (8 pages)

PAGE 1
WORM GEAR HAND WINCH INSTALLATION AND OPERATION MANUAL TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND ALL WARNINGS AND INSTRUCTIONS BEFORE USE. Due to continuing improvements,actual product may differ slightly from the product described herein. 210- 13198 26th Ave, Surrey British Columbia V3S3V7 info@endurance-marine.com www.shop-endurance-marine.
PAGE 2
RWP2000-01 and RWP2000-02 Operating Instructions & Parts Manual Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described. Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference.
PAGE 3
RWP2000-01 and RWP2000-02 Safety warning and precaution ALWAYS LEAVE AT LEAST 5 WRAPS OF THE CABLE ON THE DRUM Failure to do so may break cable connection to drum and may result in serious accident. (see Figure 2) Special warnings and precautions 1. CAUTION: Never exceed the maximum load capacity specified for each model. 2. AUTOMATIC MECHANICAL BRAKE REQUIREMENT The minimum tractive force (pulling load) required for a proper braking function on the winch is 55 lbs (25kgs).
PAGE 4
Model RWP2000-01 and RWP2000-02 10. DO NOT APPLY A LOAD to the winch when the winch cable is fully extended. The cable anchor on the winch is not capable of holding the maximum rated load capacity. 11. STAND BACK Stay out of the direct line that the winch cable is pulling. In the event the winch cable slips or breaks, it will “whip lash” along this line. 2. Line up the notch in the handle with the FITTING THE CABLE: point of the Hex in the Holder.
PAGE 5
RWP2000-01 and RWP2000-02 Spring latch Hook Grommet Thimble cable clamp Lubricating Lubricate the bearing regularly with 2 to 3 drops of SAE 30 non-detergent oil cable Figure 9 WARNING The belt breaking strain must be at least 3 times the pulling capacity and 7 times the lifting capacity of the winch.
PAGE 6
Model RWP2000-01 and RWP2000-02 Overall dimension (Inches) B 10 3/8 C D E F G 7 5/8 3 3/4 3 8 / 4 5 H I J 2 1/2 5 9 1/2 ØE D F A A Model RWP2000-01 8 B C D E F G 5 2 1/2 5 6 1/8 12 I J K L M S 15 9 1/8 115/8 4 3 3/4 3 8 M B 7 1/4 S / L I H G C D E A RWP2000-02 137/8 H 8 1/2 F Model ØI ØH C J G B A 5 J K
PAGE 7
RWP2000-01 and RWP2000-02 Operating Instructions and Parts Manual 9 10 Please provide following information: -Model number -Serial number (if any) -Part description and number as shown in parts list 8 4 7 6 5 28 29 3 11 12 2 13 1 31 32 16 17 14 30 15 18 19 20 21 22 23 24 31 Repair Parts Illustration for RWP2000-01 33 27 26 25 Repair Parts List for Manual Winch Ref. No.
PAGE 8
RWP2000-01 and RWP2000-02 Operating Instructions and Parts Manual Please provide following information: -Model number -Serial number (if any) -Part description and number as shown in parts list Repair Parts Illustration for RWP2000-02 Repair Parts List for Manual Winch Ref. No. 1 2 3 4 5 6 7 8 9 10 Description Ref. No. Qty. Description Qty.