Installation Guide

Page 19
WALK-IN TUB MANUAL
OPERATING INSTRUCTIONS
5701 NW 35 Avenue Miami, FL 33142 • Phone [phone] • Fax [phone]
OPERATING INSTRUCTIONS
When entering the walk-in tub, be sure to close the door, placing the
handle in the down position. Before activating any of the jetting controls,
you must first fill the bath to a water level at least 2 inches above the
highest jet placement. Do not put weight on the door when entering and
exiting the tub. It is recommended to leave the door in the open position
when the tub is not in use.
The pump is operated by the hydro control button, which starts the
water flow. The blower is operated by the air control button which starts
the air flow (see page 20).
Adjust the direction and rate of flow of the jets by moving the nozzle for direction. Turn either the outside ring or the nozzle clockwise
or counterclockwise for flow (some jets adjust the flow with the outside ring and some with the nozzle). Adjust the air pressure flow
of all water jets by using the hydro jet ow control (see page 20), which controls air-water mixture.
Our walk-in tubs equipped with the chromotherapy lights (ordered separately), feature a dedicated on/off switch. Pressing the
switch off and back on will change the color of light (see page 20).
EXAMPLE TUB DOOR HANDLE