Operation Manual

ENDURO
®
EM303 26
Ref: EM303-UM-TKI-0115-Rev.A.
TABLE OF CONTENTS
Package contents (parts list) Page 26
Introduction Page 27
Intended use Page 27
Specifications Page 27
Installation - safety guidelines Page 27
Installation - mechanical components Page 28
Installation - electrical/electronic components Page 29
Installation - twin axle Page 30
Operation - safety guidelines Page 31
Operation - motor units Page 32
Operation - remote control handset Page 33
Operation - electronic control unit Page 34
Operation - getting started Page 34
Operation - hitching and unhitching Page 35
Maintenance Page 36
Trouble-shooting Page 36
PACKAGE CONTENTS
Ref Qte Description
1 1 Motor unit (A)
2 1 Motor unit (B)
3 1 Main cross bar
4 1 Cross actuation centre bar
5 2 Cross actuation insert bars
6 1 Engagement tool
7 2 Aluminium chassis clamp plates (set)
8 4 Bolt - M10x60
9 2 Chassis U plate
10 1 Instruction manual
11 1 Convoluted cable trunking
12 2 Positive (+) red motor cable 5m
13 2 Negative (-) black motor cable 5m
14 1 Positive (+) red battery cable 1.8m including fuse holder & 80A fuse
15 1 Negative (-) black battery cable 1.6m
16 8 Bolt - M10x50
17 12 Nylon nut M10
18 24 Washer 10mmØ
19 20 Screw - M4x15
20 10 Cable trunking P-clips 19.2mm
21 10 Cable P-clips 10.4mm
22 4 Battery terminal connector 8mmØ
23 2 Battery terminal connector 6mmØ
24 4 Spade fork connector
25 3 Cable number markers (1,2,3,4)
26 3 Cable polarity markers (+,-)
27 4 Motor unit cable ties 8x400
28 10 Cable ties 2x70
29 1 Battery isolation switch, cover & key
30 2 Roller distance spacers 20x20
31 1 Remote control handset with lanyard
32 1 Electronic control unit
33 2 Rubber isolation shell for battery isolation switch
34 1 Remote control handset wall holder
35 2 Screw – M5x40