Specifications

21
CAMERA SETUP
FOCUS CONTROL
WB CONTROL
AE CONTROL
LINE LOCK CONTROL
SHARPNESS: 09
DIGITAL ZOOM: OFF
IMAGE FLIP: OFF
PRESET FREEZE: OFF
BRIGHT OFFSET: 0
SAVE AND EXIT (ESC TO CANCEL)
3. Place the cursor at the title field. Twist the Joystick to enter the title edit mode.
Follow the procedure of the auto scan above to edit titles.
4. To turn the stored zone On or Off, twist the
Joystick handle or press Tele or Wide Key.
5. Set the method, „BLOCK” or „V.OFF (video off)”
6. Select the Save and Exit option by pushing the
Joystick up or down. Save and exit the program by pushing the Joystick to the right.
Press
ESC to exit the program without saving.
Press the HOME key to delete programmed privacy zone at the title field.
3.12 Camera Menu,
Type EDC-3182 (18x, Art. No. 74169), EDC-3262 (26x, Art. No. 74170) and EDC-3362 (36x, Art. No. 74161)
NOTE: The features will vary depending on the camera module installed in your dome camera.
SHARPNESS The higher the value, the more edges in the picture will be enhanced (0~15).
Digital ZOOM OFF: Zoom range is limited to the optical.
2x: Zoom is extendable up to 2x of digital range.
4x: Zoom is extendable up to 4x of digital range.
MAX: Zoom is extendable Max digital zoom range.
IMAGE FLIP
This function turns the video output from the camera upside down and reverses it horizontally.
This option is helpful to install in the opposite side.
PRESET FREEZE ON: the image is frozen during calling preset.
BRIGHT OFFSET (-7, …, 0 (default), …7): Adjust the brightness level (AUTO, SHUTTER PRIO, IRIS PRIO mode only) .
PRIVACY AREA MENU
(CTRL KEY)
CONTROL
NUMBER 001
354.8 344.8