Operating instructions

7. Advanced Operation

Question 1:

How to set up the motion detection area and its sensitivity? How to record into the SD card for 30 seconds

when the motion has been activated and use the Microsoft Internet Explorer to view the recorded ﬁles ?

• Set up the motion detection

1. Click the

Application button in the home page.

2. Click the

Motion detection button on the left side of the page to enter the „MOTION DETECTION” page.

3. Click and drag the mouse left button across a targeted zone to draw a red rectangle on the image.

You can also draw the other targeted zones as you wish.

4. Please

Enable the motion detection function.

5. Set up the sensitivity level from: Lowest, Low, Medium and High to Highest.

6. Click the

Submit button to submit the setting.

• Recording the images into an SD card while the motion detection function is working

1. Click the

Application button in the home page.

2. Click the

Enable button below the ALARM item on the left side of the page to enter the „ALARM APPLICATION

ENABLE SETTING” page.

3. Tick on

„Enable ALARM-SAVE into SD Card” to activate it.

4. Click the

Submit button to submit the setting.

NOTE: Please remember to insert the SD card into the built-in SD slot of the unit ﬁrst.

• Set the recording time (the AVI duration) of the SD card

1. Click the

Application button in the home page into the „SD-Card APPLICATION SETTING” page.

2. Choose the

AVI Duration from the drop-down list.

If you want to record the ﬁle into the SD card for 30 seconds, please choose „30 seconds”.

3. Click the

Submit button to submit the setting.

• Use IE to view the recorded ﬁles

1. Click the

SD Card button in the home page to enter the page containing the „FILELIST of MEMORY CARD”.

2. Click the ﬁlename which you want to view.

3. It will ask you to enter the username and password.

4. If you didn’t set the other player before, the AVI ﬁle will be played by the Windows Media Player.