User manual

2-2. Setup – Display Mode

Press the SETUP button and enter the password. The setup menu is displayed as picture below. Select

DISPLAY icon and press SEL button to enter the setup menu item. Navigate through the menu items using

the control button (◀ ▲ ▶ ▼) and change the value of the menu item using the control button

(◀ ▲ ▶ ▼). To return to setup menu screen, press the ESC button.

Figure 2.2.1. Display mode setup screen

Table 2.2.1. Menu items in DISPLAY mode setup

Item Description

OSD

Enable/disable on-screen-display.

Select ON: show it on the screen, Select OFF: Disappear on the screen.

OSD

CONTRAST

Set the visibility level of the On Screen Display (OSD).(50-100)

SEQUENCE

Enable/disable sequential display of video in full screen mode.

SEQ-DWELL

TIME

Set the dwell time of each, single channel display in sequential display mode

(3~60seconds)

CHANNEL

Select a channel for applying the following settings using the control button (◀ ▲ ▶

▼). Press SEL button to change the channel.

NAME

Set the channel name. Press SEL button and set the channel name and select OK using

the control button (

◀ ▲ ▶ ▼).

COVERT

Enable/disable display of the video channel in live display mode.

VIDEO

Select a video output type for HDMI/VGA. (720p 50Hz, 720p 60Hz, 1080i 50Hz, 1080i