User manual

Table 2.4.1. Menu items in Device Setup screen

Item Description

ALARM OUT

Set the sensor, motion, and video loss for each alarm.

CONTROLLER & PTZ

Set the Controller and PTZ camera speed, number, type and

ID.

CHANNEL

Select specified channel for motion zone setup.

MOTION ZONE

Select either Full Zone or Partial Zone for motion sensing.

MOTION SENSITIVITY

Set the motion sensitivity for the specified channel.

Control the motion sensitivity from 1 to 9.

KEY TONE

Enable/disable key tone.

REMOTE CONTROL ID

Select an ID of remote control.

1. Select ID.

2. Press the same number as ID set in DVR on a remote

control.

3. Then icon will be displayed on Live screen of DVR that

respond to the remote control.

The options are from 00 to 99

SENSOR

Select sensor NO from 1 to 4

TYPE

Set the type of sensor for the specified channel. Options are:

OFF, N/O (normal open), and N/C (normal closed).

2-4-1. ALARM-OUT

Figure 2.4.2. ALARM-OUT setup screen