Specifications

24
C. Select „Camera” on the Device menu. Unit ID should be 1 up to 99. Unit ID is not allowed number „0”.
D. Set „PTZ Device” and „ID” of the dome camera. Select RS232/RS485 after PTZ is installed, and then set-up as below table.
4. After setting Unit ID, Camera, and RS-232/RS-485, installing dome camera is basically completed. Please refer to the manual of DVR for the other
installation.
5. Press the related number of the controller which is correspondent to unit ID of DVR. Then press DVR button and adjust unit ID of the controller
6. Make sure if any change is appeared on screen when you press button of the controller for basic testing. If there’s no change appeared, verify cable
connection and setting of installation.
RS-232/RS-485 Baud Rate Parity Data Stop Usage
RS-232 9600 None 8 1 Remote Control
RS-485 9600 None 8 1 PTZ Control