Specifications

30
6.3.1 Keys for Dome Cameras
Function Key Label Descriptions
Camera selection
No. +
Displays the selected camera on the spot out of the multiplexer and allows the camera to be controlled by
the keyboard controller, if the selected camera is a dome camera.
Function number selection with function keys. (e.g. 1 + CAM, 3 + TOUR, 5 + SCAN, 6 + PRST)
Cancel
Cancels current inputs.
Exits from currently running functions or menu, error status, etc.
Alarm
Disregards all currently activated alarms and turns off the beep temporarily.
If alarm is activated again within the programmed hold time, the timer will restart and beep again.
Relay ON Relay No. 1~4 + ON will activate the selected relay.
Relay OFF Relay No. 1~4 + OFF will disable the selected relay.
Home
Immediately calls Home function.
Deletes selected value or function in programming mode
Global
Sends all cameras to preset (e.g. 1, 2... 55 + ENTER).
888 + ENTER: Night shot mode, 999 + ENTER: Normal mode
Call Preset position
Pressing PRST will bring up the preset programming menu.
Recalls preset; e.g. 1, 2 ... 31 ... 240 + PRST
In the preset or tour programming mode, the operator can review the exiting preset (selected by cursor)
by pressing this key.
Tour
Pressing TOUR will bring up the tour programming menu directly.
Recalls programmed presets or functions sequentially. (e.g., 1 + TOUR)
Pattern
Pressing PTRN will bring up the pattern programming menu directly.
Repeats the selected pattern of the current dome camera. (e.g., 1 + PTRN)
Auto Scan
Pressing SCAN will bring up the Auto Scan programming menu.
Calls Auto panning function (e.g. 2 + SCAN repeats Auto Scan 2).
Configuration Enters programming menu. CTRL + MENU will invoke Keyboard set up menu
Program
No. + CTRL + PRST will store current view as a preset directly.
No. + CTRL + TOUR will open programming menu
No. + CTRL + SCAN will open programming menu
Control
CTRL+Joystick: In a programming mode (Preset, Pattern, Scan, Privacy....) the joystick operates as if in
the normal control mode.
While pressing and holding down the CTRL key, all movements of the joystick will start recording when in
the pattern programming menu.
CTRL + Joystick: In normal operation mode, manual speed of the joystick control will be operated in
turbo mode.
Enter
Completes entering data for the password or title
ENTER + Joystick: Direction key in DVR remote mode or Mux (PTZ, Mouse, Cursor)
Manual Focus Overrides auto focus. Moving the Zoom handle reactivates Auto Focus mode.
Manual Iris Overrides auto iris. Moving the joystick reactivates Auto Iris mode.
Zoom Zoom control
Joystick
Twist,
Up / Down
Left / Right
Zoom control (proportional to position).
Tilt control, Cursor Up / Down in the menu
Pan control, Cursor Left / Right or Page scroll in the menu.