Instruction manual

Factory Reset

This switch will only be used on the rare occasions that you want to return all the settings to the original factory

settings.

CAUTION: When performing a Factory Reset, you will lose any settings you have saved.

Turn the MMX off. –> Turn it on again. While the MMX is initializing, the front panel LEDs will blink. –> When the

front panel LEDs blink, poke a straightened paperclip into the factory reset switch hole. –> Hold the switch until a

buzzer sounds. –> The MMX resets to factory defaults and restarts after completing the factory reset.

You can perform a factory reset remotely while the MMX is turned on by running the INIT program and selecting the

Reset – Factory Reset menu. The MMX restarts after completing the factory reset. Refer to the INIT User’s Manual for

details on remote factory resetting.

NOTE: The system should be set up all over again after performing the factory reset. The MMX system might

not work properly when applying previously saved settings to the MMXs after the factory reset.

4. Case Installation

All devices including MMXs should be networked via Ethernet.