Instruction manual

27
4. Set up the MMX ID and options by using the MMX ID switch and option switch on the rear panel of the MMX.
Refer to MMX ID Switch and Option Switch for details.
[Master MMX] Set up the MMX ID to „0” and the MASTER MODE switch to the On position.
ID MMX ID Switch
0
Option Switch
[Spot MMX] Set up the unique MMX ID for each spot MMX from „0” to „3” and set the END OF SLAVES switch
of each spot MMX to the On position and the SPOT MODE switch to the On position.
ID MMX ID Switch
0
Option Switch
[Slave MMX] Set up the unique MMX ID for each slave MMX from „1” to „63” in order and set the END OF
SLAVES switch to the On or Off position depending on the slave MMXs’ ID setting. Set the END OF SLAVES
switch of the slave MMX with the highest ID number to the On position and the other to the Off position.
ID MMX ID Switch
1
Option Switch