Instruction manual

43
1. Press the spot monitor’s ID by using the network keyboard. You can check the spot
monitor’s ID by running the INIT program and connecting the network keyboard
(Remote Setup –> Device –> Setup –> Matrix –> [ID] Spot Monitor).
2. Press the button.
3. Press the camera ID. You can check the camera ID by running the INIT program and
connecting to the network keyboard (
Remote Setup –> Device –> Setup –> Matrix –>
[ID] ‘Camera name’).
4. Press the button. Video from the camera is displayed in the spot monitor, and
you can control the camera by using PTZ control buttons if the camera is a PTZcamera.
1. Press the spot monitor’s ID by using the network keyboard. You can check the spot
monitor’s ID by running the INIT program and connecting the network keyboard
(Remote Setup –> Device –> Setup –> Matrix –> [ID] Spot Monitor).
2. Press the button.
Controlling DVRs on Spot Monitor
You can control DVRs connected to MMXs on the spot monitor by using a network keyboard.
Controlling Cameras on Spot Monitor
You can change the channel for monitoring on the spot monitor by using a network keyboard.