Instruction manual

1. Press the spot MMX monitor’s ID by using the network keyboard. You can check the spot

MMX monitor’s ID by running the INIT program and connecting the network keyboard

(Remote Setup –> Device –> Setup –> Matrix –> [ID] Spot MMX Monitor).

2. Press the button.

3. Press the DVR ID. You can check the DVR ID by running the INIT program and connecting

the network keyboard (Remote Setup –> Device –> Setup –> Digital Video Recorder

–> [ID] ‘DVR name’).

4. Press the button. The DVR’s main monitor screen is displayed in the spot MMX

monitor, and you can control the DVR by using device control buttons.

5. Press the camera number of the DVR..

6. Press the button. Video from the camera is displayed in the spot MMX monitor,

and you can control the camera by using PTZ control buttons if the camera is a PTZ

camera.

Controlling DVRs on Spot MMX Monitor

You can control DVRs connected to MMXs on the spot MMX monitor by using a network keyboard.