Instruction manual

Spot MMX Monitor

Check the cable connection between a master MMX or slave MMXs and spot MMXs if the spot MMX is installed.

• Number of spot monitors connected to Spot MMX: Select the number of spot monitors connected to spot

MMXs, and the operator information for each spot monitor is displayed.

• Master/Slave MMX – Spot MMX Connection: Displays the cable connection between a master MMX or slave

MMXs (spot output) and spot MMXs (video input). Clicking the

icon displays the connection information on

a web page.

NOTES:

• When connecting a master or slave MMXs to spot MMXs, you should connect them in order of

Master/

Slave MMX – Spot MMX Connection above. Otherwise, spot MMXs will not work properly.

• The cable connection is to be changed depending on the number of the master and slave MMXs or spot

MMXs.