Manual

www.enerdrive.com.au Page 25
APPENDIX II
Detachable Display Panel Cable:
The display panel is detachable and can be installed away from the unit, using the provided 7.5m RJ12
cable. You will need to remove the two screws indicated below. Even though the unit can operate with
the cable plugged in whatever direction, we suggest plugging the end with the ferrite bead EMI/RFI
lter into the main unit.
The RJ12 “crossover” cable has 6 wires with the following pin-out:
RJ-12 RJ-12
7.6 Meters
RJ-12 (6 wires) Rolled Over Cable (also called Rollover)
1
6
6
1
BLUE
YELLOW
GREEN
RED
BLACK
WHITE
Use phillips #0 screwdriver
Ferrite Bead Filter
This end toward the main unit.