Manual

Enerdrive ePOWER Inverter Owners Manual (Rev. 1.0)Page 8

Installing the Enerdrive ePOWER Inverter System

WARNING! Electrical Shock Hazard

The unit ‘On/O’ switch does not disconnect the DC power from the battery. Use the DC Disconnect

Switch or disconnect the DC input cables connection to disconnect the DC power from the battery

before working on any circuits connected to the unit. Failure to follow these instructions can result

in death or serious injury.

ePOWER Inverter Installation:

• Choose an appropriate mounting location.

•

For indoor use, the orientation of the unit can be mounted in any direction except with the DC Input

panel facing downwards.

• Use inverter mounting tabs as a template guide for mounting holes.

•

Drill the 4 mounting holes and place the inverter in position and fasten the inverter to the mounting

surface.

230mm

539mm

431mm

317.40mm

444mm

EN1120X & EN1120X-24V

EN1126X

230mm

216mm