DC2DC Charger User Manual

For Program Battery
Types refer to
Appendix A3
Continues from
Appendix A1
CH1 Battery Type Menu
Press SEL
to enter
Voltage Menu
Press SEL to change voltage
(13.9V to 14.6V in 0.1V steps)
CH1 LITHIUM BULK
VOLTAGE
Press SEL
to change
battery type
Appendix A2
VERSION: REV. 1.00 - June 2017
Charger conguration is a simple step by step process as shown below.
For Tech Support call Enerdrive on 1300 851 535
NOTE: The current setting below is based on the EN3DC40+ battery charger.
Press SET to keep the current setting and toggle to the next menu
Press SEL
to return to
voltage
LITHIUM MODE
CH1 LITHIUM
FLOAT VOLTAGE
Display shows the Float
voltage for Program.
Press SEL
to return to
change voltage
Press SET to keep the current setting and toggle to the next menu
Press SET to keep the current setting and toggle to the next menu
Press SET to keep the current setting and toggle to the next menu
Press SEL
to enter
Voltage Menu
Press SEL to change voltage
(13.0V to 13.8V in 0.1V steps)