Brochure

ePRO PLUS high precision battery monitor
The ePRO PLUS is our latest generation, highly advanced battery monitor. It consists of an intelligent shunt and a remote control display unit. The shunt has a Grid
Optimized footprint for perfect integration with our DC Modular products.
This advanced battery monitor not only shows the true state of charge of your battery system. It also oers a large amount of additional features to optimally supervise
your battery system and control external equipment. The ePRO PLUS is compatible with lead based and Lithium batteries (LiFePO4).
The ePRO PLUS can monitor up to three battery banks. The inputs for battery bank 2 and 3 can also be congured for other purposes, like mid-point voltage measurement,
keyswitch input, setup lock or backlight control. The ePRO PLUS battery monitor can measure DC currents up to 600Amps (500Amp continuous) and voltages up to
70Vdc. So any lead- or lithium based battery from 12V up to 48V can be monitored.
The installation time is minimal, requiring only one supply wire to the intelligent shunt base and a single ‘QuickLink’ cable between the shunt base and the control/
display unit (CDU). Additionally, the battery minus cable must be interrupted in order to insert the shunt into the high current circuit. The fused supply wire and the
QuickLink cable are both included in the package, avoiding the need for a separate connection kit.
Special ber reinforced base material
oers excellent high temperature
properties, good chemical resistance
and high strength
Ultra low loss custom made
shunt module can handle 500A
continuously
Stainless steel studs, nuts and
washers for optimal corrosion
resistance
Dual QLINK port for connection to
the Control & Display Unit or other
accessories
Input port for optional battery
temperature sensor
Multi purpose indicator provides
status, error and battery state of
charge information (3 colours)
Active shunt module
Control & Display Unit
Compact round Control & Display
Unit with splash proof front panel,
large backlit display and only 36mm
installation depth
Permanent large digit battery state of
charge (%) indicator
Second parameter row allows an
additional parameter to be shown
along with state of charge (%). During
setup, this row will also show a clear
textual explanation of each function.
Voltage sense input for (main) battery
bank 1. Also positive supply input for
ePRO Plus
Voltage sense inputs for battery
banks 2 and 3. Or assignable to other
functions
Potential free 5A/30Vdc (1A/70Vdc)
programmable alarm relay contact to
control external equipment
Large circular bar graph provides a
clear battery state of charge indication.
Smart display animations indicate
whether the battery is being charged
or discharged and by which intensity
Simple three button interface allows
easy parameter readout selection in
normal operating mode and intuitive
navigation through the setup menus