Manual
www.enerdrive.com.au Page 31
7. RESET MENU
In the Reset menu, you can reset a number of battery monitor items. This menu can be accessed
by the following sequence:
When the Reset menu is entered, you can use the left and right keys to browse through the
dierent reset items. By pressing the MENU key, the selected reset item can be viewed. The
default value for all reset items is NO. To actually reset the selected item, use the left and right
keys to change the value from NO to YES or vice versa. Pressing the MENU key again, will step
back to the Reset menu. All reset items set to YES will only be reset once the Normal Operating
Mode is accessed again by pressing the MENU key for 3 seconds. The following Reset menu
items are available:
Table 11
Reset item Reset description
r 1.0
Reset Alarms. Use this item to suppress all present alarms. Associated alarm
contacts will be turned o and the alarm indicator on the display will also be
turned o. A suppressed alarm can only be re-triggered when the alarm’s o
conditions are met rst.
r 1.1 Reset Maintenance Hours. Resets the maintenance hour counter (status item
S4.1). This reset item is only of importance when maintenance hours are enabled
(function F4.1 is set to ON). Use this reset item when a maintenance job has
been performed.
r 1.2
Reset Battery. Use this item to reset your current battery status and history
information. This can be applied after you have installed a fresh battery of the
same specications as the previous one.
r 1.3
Factory Reset. This reset item can be used to reset all Function, Status and
History values to factory default values. After a factory reset, the ePRO Plus
restart to the Setup Wizard again.