User Manual
LOAD MODE SETTING Operating Steps:
BATTERY TYPE Operating Steps:
Under the load mode setting screen, press the SET button and hold on for 5 seconds until the
number begins ashing, then press the MENU button to set the parameter, then press the SET
button to conrm.
Under the Battery Voltage screen, press the SET button and hold for 5 seconds to enter the
Battery Type Menu. Choose the battery type by pressing the MENU button, and then press the
SET button to select the chosen battery type.
NOTE: Please set the Light ON/OFF, Test mode and Manual mode via Timer 1. Timer 2 will be disabled
and display “2 n”.
NOTE: Please refer to the battery voltage parameters table for the dierent battery type.
www.enerdrive.com.au
Page 12
SOLAR CHARGE CONTROLLERS