Instructions / Assembly

Please read instructions carefully before assembly
Retain this manual for reference
Veuillez lire attentivement les instructions avant l'assemblage
Conservez ce manuel pour référence
CONTENT
1. Components
2. Assembly
3. Operation
4. For your safety
5. Cleaning and storage
6. Specifications
7. Grounding instructions
8. Warranty
Français
1. COMPONENTS
Please empty the packing box thoroughly, and make sure that there are no missing parts.
DO NOT PLUG THE UNIT IN UNTIL THE UNIT IS COMPLETELY ASSEMBLED. MAKE SURE THERE IS NO DAMAGE
TO THE UNIT AND POWER CORD.
IF THERE IS ANY DAMAGE OR IF THERE ARE MISSING PARTS, PLEASE CONTACT US AT: 1-866-967-7333 EST.
2. ASSEMBLY
Parts: 3 X M6*25 mm screws
1 X holding plate
1 X Allen key
Place the heater and its components on a non-marking and non-scratching surface.
Read this manual before installation and use. Keep this manual in a convenient place for future use if needed.
Installation:
1. Put the heater upside down.
2. Place the base cover on the heater. Insert the three M6*25 screws through the holding plate.