Manual

ManualsBrandsEnergenics ManualsHardware120 Low Profile Lint Filters 2007

www.energenics.com

1470 Don Street • Naples, Florida 34104 Telephone: (239) 643-1711

Fax: (239) 643-6081

Customer Service: (800) 944-1711

Installation & Operation Manual

For ENERGENICS 007 Control

120 Low Profile Lint Filters

Descriptions Page

Table of Contents 1

Description of Lint Filter Operation 2

Receiving and Installation 3

Important Installation Considerations 4

Warnings/Cautions 5

Installation Requirements – Dimensions & Erection 6

Installation Requirements – Sheet Metal 7

Installation Requirements - Piping 8

Fire Control System (optional) 9

Proper Application with Booster Fans & Barometric Dampers 10

007 Control Installation Instructions:

UL® Control Schematic & Wiring Diagram 11

Maintenance Requirements 12

Parts List 13

Summary of content (13 pages)

PAGE 1
www.energenics.
PAGE 2
DESCRIPTION OF LINT FILTER OPERATION Your new Energenics Lint Filter operated with a UL approved control represents the most advanced features available in the laundry industry to date. The following list the functions and mode of operation: Blowdown (cleaning) – The Lint Filter will monitor the system backpressure and automatically initiate the blowdown cycle.
PAGE 3
RECEIVING & INSTALLATION Before you sign the Bill of Lading: 1. Receiving- Inspect units inside and out for signs of damage Verify all components are delivered per the Bill of Materials. Report damage to the carrier IMMEDIATELY. Note ALL damage on the Bill of Lading. This is your responsibility and you must file all claims. The filter is fully assembled and ready for installation. The control, valves, and lint bag are in the cardboard box. 2.
PAGE 4
Important Installation Considerations All Energenics Lint Collectors can be mounted indoors or outdoors. If it is mounted outdoors we recommend our Side Discharge or a field installed swept radius elbow (Gooseneck). Do not use a conical cap on the filter exhaust discharge. All solenoid valves should be located inside the building. Also, mount the supplied air pressure gauge at the blowdown pipe on top of the filter.
PAGE 5
Warning and Caution You have purchased the finest lint filter available for your facility. Please follow these instructions to ensure a safe long life for your filter and facility. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN AN UNSAFE OPERATING CONDITION, INCLUDING THE POSSIBILITY OF FIRE. DO NOT OPERATE ANY DRYER CONNNECTED TO THIS FILTER WITHOUT BEING CERTAIN THE FILTER STARTUP HAS BEEN COMPLETED AND THE FILTER IS IN OPERATING CONDITION. Insure it is installed in compliance with local codes.
PAGE 6
PAGE 7
PAGE 8
PAGE 9
PAGE 10
PAGE 11
PAGE 12
Maintenance Requirements The frequency of your maintenance requirements depends upon the number of hours of operation and upon variances in your product output. For a single-shift operation, without special problems, the frequency recommended below should suffice. You should set your own schedule based on your experience. 1. WEEKLY Visually inspect the filter inside and outside, its controls and their operation. At time of such inspection, note and correct any discrepancies from normal operation. 2.
PAGE 13
MODEL 120 PART NUMBER 1213 1214 1215 1211 12570 Lint 12580 Lint B120 13920 Flex WPSC-3/4 WPSC-3/4 6015 6690 90007 007 B3B-24DC KL3BRDRC2S DESCRIPTION Rotor Support Rotor Hood With Rain Bonnet Hood without Rain Bonnet Screen with Cables (210 Micron) Screen without Cables (210 Micron) Lint Bag (76” x 27 ½”) Connector 3/4” Air Solenoid Valve (24 VAC) 3/4" Water Solenoid Valve (24 VAC) Fenwall Fire Sensor Spray Head (Water Nozzle) Main Control Box Siren Alarm Strobe Alarm 13