User guide

ManualsBrandsEnergenics ManualsHardwareAir-Flow Optimizer (Old)

1470 Don Street • Naples, Florida 34104 Telephone: (941) 643-1711

Fax: (941) 643-6081

Customer Service: (800) 944-1711

Installation & Operation Manual for Energenics Air-Flow

Optimizer

Table of Contents Page 1

Receiving and Installation Page 2

Description and Installation of Air-Flow Optimizer Page 3

Important Installation Considerations Page 4

Summary of content (4 pages)

PAGE 1
470 Don Street • Naples, Florida 34104 Telephone: Fax: Customer Service: (941) 643-1711 (941) 643-6081 (800) 944-1711 Installation & Operation Manual for Energenics Air-Flow Optimizer Table of Contents Page 1 Receiving and Installation Page 2 Description and Installation of Air-Flow Optimizer Page 3 Important Installation Considerations Page 4
PAGE 2
Receiving and Installation 1. Before you sign delivery documentation, please inspect all packaging to assure there is no freight damage. It is your responsibility because all shipments are FOB Factory. Once freight is on board Energenics is released from all liability for damage caused in transit. 2. All packaging should be kept intact in the unlikely situation where the items have to be returned to the factory for warranty reasons.
PAGE 3
Description of Air-Flow Optimizer Operation Your new Energenics Air-Flow Optimizer represents the most advanced feature available in the laundry industry to date. The following is a description of its capabilities: The system consists of 3 components: 1. A pressure standoff which is to be mounted at the single point that will be an accurate depiction of the total affect of the dryers or other devices that result in exhaust air to be ducted outside of the laundry.
PAGE 4
Important Installation Considerations When mounting the variable frequency drive and the Energenics pressure control attention must be paid to with respect to the location. It is imperative that the system be mounted in a dry relatively clean environment. The system should receive its source of voltage from a clean dedicated circuit. As with all solid state components they are not impervious to spikes and surges.