User manual

9
EG-PMSU
PROGRAMMABLE USB POWER STRIP
All brands and logos are registered trademarks of their respective owners
 The manageable sockets of EG-PMSU can be programmed to be on
or off. The current status of each manageable socket is represented
by the corresponding indicator which will be lit if socket has power to
it.
 If the Main rocker switch (Z) (see figure #1 above) is turned off then
the manageable sockets cannot be switched on by either Power
manager software or the hardware schedule.
 As soon as you turn the Main rocker switch (Z) on then the Power
manager software or the hardware schedule will be able to turn the
manageable sockets on and off.
 To protect the connected devices from possible high current and
short circuit EG-PMSU is equipped with the automatic circuit breaker.
NOTE: If the total power consumption (or peak power) of the devices,
connected to EG-PMSU exceeds 1100 Watts, the integrated in the main
power switch circuit breaker may power EG-PMSU off. In this case,
please, remove the excessive load first and then turn the main power
switch on again to restore the power supply (see figure #1 above).
3.2. Power Manager installation
 Insert the Power Manager CD into a PC CD-ROM drive.