User manual

EGM-PWML ENERGY METER WITH MEMORY

All brands and logos are registered trademarks of their respective owners

To delete all previous recorded data, just push the Clear database

button.

Note: Device IP, Port and Enabled fields will be grey – these

functions are only available on the LAN version of the EGM-PWM.

To open the Power Meter window, select your EGM-PWML device

from the list (see Figure #2 above) and then click the Power meter button

(see the chapter 7 below).

7. Power Meter

The Power Meter window can be opened in either a minimized or

maximized mode. The minimized Power Meter window is shown in Figure

#4 below. This window is useful for monitoring selected measured values.

It displays:

 A single measured value (e.g. money spent)

Note: Click with the right mouse button over this field to choose a

different measured value to display

 Two warning indicators. These indicators by default would

show you when the voltage is beyond its limits (too high or too low)

Note: Read Chapter #9 below if you wish to customize these

indicators