User manual

6
EGM
-
PWM
-
LAN ENERGY METER WIT
H LAN INTERFACE
All brands and logos are registered trademarks of their respective owners
3. Installation of EGM-PWM-LAN
To use EGM-PWM-LAN please follow next steps:
• Connect EGM-PWM-LAN to the wall socket first and then to the LAN
socket (or your computer LAN card) with the provided patch cord or
vice-versa.
• It is strongly recommended to avoid damp or wet places for
installation.
• EGM-PWM-LAN should be connected to the European AC wall
socket of the standard DIN 49 440;
• It is possible to connect the EGM-PWM-LAN to the power source
via other multi-plugs, surge protectors, voltage regulators or UPS.
3.1. Preparing LAN configuration of EGM-PWM-LAN
Before configuring EGM-PWM-LAN hardware settings, please, let it
obtain its IP address. Follow the steps below:
• Make sure EGM-PWM-LAN is connected to the local network with
the provided RJ-45 cable (option A - recommended)