Instruction manual

1400W MITRE SAW ENB475MSW

the locknut (g2) on the set screw for 45°.

(Fig. 16,17)

2. CHANGING THE SAW BLADE(Fig. 18-22)

NOTE: Blade securing bolt has a left hand thread.

Remove the blade, (we recommend the use of a

stout glove for this). Clean any saw dust and

debris from the arbor and saw blade securing

flanges.

1.Release the screw (h1) to remove the guard

retraction arm (6).(Fig. 18)

2.Release the screw(h2).(Fig. 19)

3.Press the spindle lock button (22), and use the

provided hex key (24) to release the screw (h3) at

the same time.(Fig. 20)

4.release the blade.(Fig. 21,22)

To refit the blade, follow the above procedure in

reverse order. If you want to take the inner flange

out for cleaning, refit it as shown in Fig.23.

CAUTION: ALWAYS install the blade with the blade

teeth and the arrow printed on the side of the blade

pointing down at the front of the saw. The direction

of blade rotation is also stamped with an arrow on

the upper blade guard.

3. MOVING THE SAW

1. When transporting the saw with fixed locations,

make sure that the saw head is locked in the lower

position.

2. The rotary table locking knob, the bevel lock knob

must all be securely tightened.

Fig.18

Fig.19

Fig.20

Fig.21

Fig.22

Fig.23

Bolt-

left

hand

thread

Outer flange

Blade

Inner

flange