Instruction manual

1400W MITRE SAW ENB475MSW
1.Always be alert when using this product, so that you can recognise and handle risks
early. Fastv intervention can prevent serious injury and damage to property.
2.Switch off and disconnect from the power supply if there is any malfunction. Have the
product checked by a qualified specialist and repaired, if necessary, before you put it into
operation again.
Health Surveillance
All employees should be part of an employer’s health surveillance scheme to help identity
any vibration related diseases at an early stage, prevent disease progression and help
employees stay in work.
Residual risks
Even if you are operating this product in accordance with all the safety requirements,
potential risks of injury and damage remain. The following dangers can arise in connection
with the structure and design of this product:
1.Health defects resulting from vibration emission if the product is being used over long
periods of time or not adequately managed and properly maintained.
2.Injuries and damage to property due to broken application tools or the sudden impact of
hidden objects during use.
3.Danger of injury and property damage caused by flying objects.
WARNING!
This product produces an electromagnetic field during operation! This field may under
some circumstances interfere with active or passive medical implants! To reduce the risk of
serious or fatal injury, we recommend persons with medical implants to consult their doctor
and the medical implant manufacturer before operating this product!
Important note
Be sure the supply is the same as the voltage given on the rating plate. Remove the mains
plug / battery pack before carrying out any adjustment or servicing.
Intended use
The machine is intended as a stationary machine for making straight lengthways and
crossways cuts in wood. Horizontal mitre angles of -45° to +45° as well as vertical bevel
angles of 0° to +45° are possible.